Flotation Machine Equipment

The flotation machine is the latest design to use the circular tank concept and combines the benefits of circular cells with the unique features of the Minerals mechanism to create the ideal conditions to maximize floatation performance for all roughing, cleaning and scavenging duties.

The machine can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine. It features: high inhalation, low power. Each chute can inhale gas, sink magma, separate. There is no need of accessory equipments horizontal equipment. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface. It is easy to adjust. The upward one makes the magma cycle toward upward, which the downward one makes the magma cycle downward.

Coal Flotation Tailings Machine Equipment

Types of mechanical flotation machine flotation machine, inflatable flotation machine, flotation machine or hybrid inflatable flotation machine, gas precipitation flotation machine.Mechanical flotation machineMechanical flotation machine and stirring the pulp of the inflatable are achieved by a mechanical agitator, air flotation machine is outside theSelf-priming flotation machines, pneumatic stirrer suction pump with similar characteristics, both air and self-absorption self absorption slurry.Mechanical flotation machine (commonly known as type A) which is characterized by:First, the cover is installed on the guide vanes 18 to 20.Second, the impeller, cover, vertical axis, the intake pipe, bearings, pulleys and other assembled - a whole part.Third, the trough installed in a circle around the vertical fin plate to prevent the pulp produced vortex.

Flotation device has the following characteristics: low power consumption. Each slot both suction, suction slurry and flotation triple function, since as flotation circuit, without any auxiliary machine tools, the level of configuration, ease of process changes. Pulp cycle is reasonable, to minimize sand sedimentation. Cycle on the leaves in the pulp, the pulp produced under the leaves under the cycle.

Copper Molybdenum Flotation Machine Equipment

Molybdenum also is the byproduct of a copper mill . The crushed copper ore is fed to the grinding circuit where water is added and the ore is ground to the proper size. Lime and an oil for collecting molybdenum are usually added in the grinding circuit. A copper collector may also be added at this point.

The pulp progresses to the flotation cells. The frother and copper collector are usually added to the pulp just before the roughers. Additional copper collector is often added to the scavenger flotation cells and may be added at several other points. The froth, enriched in copper and molybdenum, is removed from the flotation roughe

Copper Molybdenum Flotation Machine Equipment

rs and scavengers. This enriched material is now called the rougher concentrate or cleaner feed. The combined rougher-scavenger concentrate may be 5% Cu and 0.06% Mo (a concentration factor of 3 to 10 times is typical).

Tags: Copper Molybdenum Flotation Machine Equipment

Bookmark: