Single Cylinder Hydraulic Cone Crusher adopts the best combination of crushing frequency and eccentricity, so size of the crushed product is much smaller.  Therefore, more crushing and less grinding efficiency is more significant, crushing and grinding power consumption is reduced greatly.  Perfect combination of high crushing efficiency and highly efficient chamber makes larger capacity than other crushers.  More materials are crushed by different layers, so size of final product is evenly cubic.  Hydraulic adjustment and method for cleaning chamber make operation and maintenance much more convenient and automatic.  This series of Single Cylinder Hydraulic Cone Crusher has much less trouble, and operating ratio is increased more than 85%, so the whole cost is reduced greatly.
1.  Materials are crushed into much smaller size, so more crushing and less grinding efficiency is realized. The crushing capacity in the following process is increased, and the system power consumption is reduced.
2.  Larger capacity and smaller size of final product reduce cyclic load, so chute of vibrating screen and belt conveyor are worn slightly, and power consumption of belt conveyor is reduced too.
3.  Spare parts can be easily changed, so downtime is shortened.
Working principle: Crushing process is completed between the fixed cone and eccentric rotating moving cone.  Horizontal axis of crusher is driven by motor through the V-belt, and drives eccentric cover by gear.  Eccentric cover makes main shaft rotate to cause eccentricity.  Materials enter crushing chamber through upper inlet of crusher, and are discharged out through lower outlet.
Advantages
1.  Human design and hydraulic adjustment of discharge outlet save time and work.  Adjustment can be controlled precisely.
2.  Single hydraulic system adjusts main shaft and body, the body can rise and decline integrally to adjust discharge size, so side cylinder and upper frame with slope can be avoided.
3.  Working pressure system can be adjusted hydraulically, pressure adjusting system can discharge super hard materials to protect the machine.
4.  Spare parts can be changed easily.  Fixed cone and cone body combine stably after precise design, and filler is not necessary to be filled again, so time to change spare parts can be saved.  Fixed cone is installed stably, so stuffing is not necessary to be filled.
5.  Hydraulic pressure of the whole machine is so low that it gives lower pressure to the main frame, and hydraulic system lasts longer.
6.  The machine is designed with small size, so installation and transportation are very convenient.

Operating principle:

Classifier, together with cyclone separator, dedus ting filter and radial fan, forms a syst em of classification. Under the lashing force of radial fan,& nbsp;feed materials are brought with uprising  ;air stream into classifying cavity from feed  inlet of classifier. Under strong centrifugal forces of high-spee d rotating turbo wheels, coarse and fine  ;materials are separated. Coarse materials, together with some fine&nb sp;materials, lose speed after bumping against&nbs p;wall and fall to secondary draught. During strong washing of the secondary  drought, coarse and fine materials are separa ted once again. Fine materials go up to classifying cav ity to be classified continuously, while coar se materials fall down to discharging outlet& nbsp;and let out.

Performances and features (ITC series air-stream&n bsp;classifier)

l Suitable for dry micro-products.

l Coal dusts powder, construction materials,  metallurgy, non-minerals and fire-proof materials. The max throughput is 30t/h.

l Particle size: D97:6u-45u, Classifying rate>7 0%.

l Vertical classifying turbo-wheel, low rotating&n bsp;speed, wear -resistance and low installed  ;power.

l To be equipped with ball mill and  ;others with large throughput to form closed& nbsp;or open circuit and produce particles wi th narrow size distribution.

l Programmable control system and simple oper ation.

PEV series of European Jaw Crusher is a new product absorbing world advanced technology, bases on our present traditional jaw crusher, and adopts three-dimensional design theory. Comparing with traditional jaw crusher, it has larger capacity and crushing ratio, bigger range of input size, evener product size, and easier maintenance.
Features:
1.Symmetrical deep crushing chamber is adopted to maximize range of feed size, capacity and crushing ratio.
2.Three-dimensional software is adopted to optimize crusher parameters and parameter proportion, and reduce equipment self-weight, so capacity is increased more than 30%.
3.Bearing seat is designed integrally, so manufacturing difficulty is greatly reduced, and bearing life is increased.
4.There is a thick replaceable plate on the top of moving jaw to prevent moving jaw from being impacted. 5.Wedge is adopted to replace traditional gasket, so the adjustment is much easier and more reliable. Discharging size can be adjusted into any size of the adjustment range.